top of page

POM is valued for stiffness, dimensional stability, low friction, and wear performance, making it suitable for precision mechanical components, gears, bearings, and other moving parts.

Polycarbonate (PC) provides a combination of impact strength, transparency, dimensional stability, and temperature performance and is used in automotive, electronics, healthcare, consumer products, and other demanding applications.

PPA and other high-temperature engineering plastics are used where conventional engineering polymers may not provide sufficient thermal stability, chemical resistance, dimensional performance, or long-term reliability.

Material selection therefore needs to consider not only the polymer family, but also grade, reinforcement, additives, processing conditions, environment, and final application.

am004.png
am004.png
SLM printed parts
am009.png
am009.png
SLM printed parts

Choosing the Right Advanced Material

There is rarely a single “best” material. The right material is the one that delivers the required performance within the technical, manufacturing, regulatory, and commercial constraints of the application.

Material selection may need to consider:

Mechanical Performance
Tensile strength, stiffness, impact resistance, fatigue, creep, wear, and durability.

Thermal Performance
Continuous and peak operating temperature, thermal aging, heat distortion, and dimensional stability.

Chemical Resistance
Exposure to oils, fuels, solvents, acids, alkalis, water, cleaning agents, and other chemicals.

Electrical Performance
Dielectric strength, insulation, conductivity, tracking resistance, and electromagnetic requirements.

Environmental Exposure
UV radiation, humidity, weathering, temperature cycling, and long-term aging.

Processing Requirements
Injection molding, extrusion, blow molding, thermoforming, machining, additive manufacturing, coating, or composite processing.

Regulatory & Certification Requirements
Depending on the application, requirements may include food contact, medical, automotive, electrical, flame-retardancy, drinking-water, or other industry-specific standards.

Commercial Considerations
Availability, supply reliability, material cost, tooling, processing cost, scrap, logistics, and total cost of ownership.

ADVANCED MATERIALS

Engineering Materials for Demanding Applications

Advanced materials are developed to deliver specific combinations of performance that conventional materials may not provide. Mechanical strength, thermal resistance, chemical resistance, dimensional stability, electrical performance, lightweighting, durability, and processability can all influence material selection. From engineering plastics and high-performance polymers to specialty additives, functional fillers, composites, and sustainable material solutions, the right material must be selected according to the application and manufacturing process. At Rehberium, we connect material technologies with the applications, manufacturers, suppliers, and markets where they can create real value.

Additive Manufacturing is no longer limited to rapid prototyping. It has evolved into a broad group of industrial production technologies capable of producing complex, lightweight, customized, and functional parts across polymers, metals, composites, and other advanced materials. The right technology, material, design strategy, and post-processing route must be considered together to achieve the required performance, quality, cost, and production volume. At Rehberium, we look at Additive Manufacturing from this complete technical and commercial perspective—connecting technologies, materials, applications, and business opportunities.

am001.png

Understanding the Advanced Materials Landscape

Advanced Materials cover a broad range of polymeric, composite, and functional material technologies developed to meet demanding technical requirements. The boundaries between engineering plastics, specialty polymers, additives, composites, and functional materials are increasingly interconnected as manufacturers look for lighter, stronger, more durable, more efficient, and more sustainable solutions.

Engineering Plastics such as polyamide (PA), polybutylene terephthalate (PBT), polyoxymethylene (POM), polycarbonate (PC), and polyphthalamide (PPA) provide combinations of mechanical performance, dimensional stability, temperature resistance, chemical resistance, and processability for demanding applications. BASF's current engineering plastics portfolio, for example, includes PA, PBT, POM, PPA and high-temperature polymers such as PPSU, PSU and PESU. 

High-Performance Polymers extend material performance into applications where conventional engineering plastics may reach their limits. Materials such as PEEK, high-performance polyamides, PEBA and other specialty polymers can provide combinations of high temperature resistance, chemical resistance, low friction, wear resistance, and mechanical performance.

Evonik's current portfolio includes PA12, PEEK, PEBA and other high-performance polymer systems. 

Polyurethanes and Thermoplastic Polyurethanes (TPU) provide another important group of advanced materials, combining properties such as flexibility, toughness, abrasion resistance, elasticity, and processability. They are used across automotive, consumer, industrial, medical, textile, and other applications. 

Functional Additives, Fillers and Modifiers can significantly alter the processing and final performance of polymers. Antioxidants, light stabilizers, processing stabilizers, impact modifiers, fillers, dispersing agents, and other functional additives can influence durability, weathering resistance, processing behavior, mechanical properties, surface characteristics, and product lifetime.

am002.png
am003.png
am003.png
SLM printed parts

Engineering Plastics: Performance Beyond Commodity Polymers

Engineering plastics are selected when standard commodity polymers cannot provide the required combination of mechanical, thermal, chemical, dimensional, or electrical performance. Their value often comes from the ability to replace metals or conventional materials while enabling weight reduction, design flexibility, corrosion resistance, part integration, and efficient processing.

Polyamides (PA) are widely used where strength, wear resistance, chemical resistance, and temperature performance are required. Different grades, reinforcements, and formulations allow their properties to be tailored to specific applications.

PBT combines dimensional stability, electrical properties, chemical resistance, and processability and is widely used in automotive and electrical/electronic applications.

am005.png
am005.png
SLM printed parts

High-Performance Polymers for Extreme Requirements

Some applications demand material performance beyond the capabilities of conventional engineering plastics. High-performance polymers are designed for environments involving elevated temperatures, aggressive chemicals, demanding mechanical loads, wear, friction, electrical requirements, or long-term dimensional stability.

PEEK, for example, is used in demanding industrial, electrical, automotive, aerospace, and medical applications where high temperature resistance, chemical resistance, mechanical performance, and durability are required. Evonik positions PEEK as a high-performance material for applications where lightweight, durable components are required under demanding conditions. 

High-performance polyamides, including long-chain polyamides such as PA12, can offer a useful combination of toughness, chemical resistance, low moisture uptake, flexibility, and processability. Specialty polyamides and PEBA can extend this performance into applications requiring specific combinations of flexibility, durability, and chemical or environmental resistance. 

Other high-performance polymer families, including PPS, PPSU, PSU, PESU, PEI, PAI, PTFE and fluoropolymers, can provide specialized combinations of thermal, chemical, electrical, tribological, or dimensional performance depending on the application.

The commercial value of these materials comes from solving a specific engineering problem—not simply from having a higher material specification.

Additives, Fillers & Modifiers: Engineering the Material

The polymer itself is only one part of the material system. Additives, fillers, reinforcements, and modifiers can fundamentally influence how a material is processed and how the final product performs.

Antioxidants and process stabilizers help protect polymers against degradation during processing and service.

Light stabilizers and UV absorbers improve resistance to photo-oxidation and long-term outdoor exposure.

Impact modifiers can improve toughness and impact performance where brittle behavior is a limitation.

Processing aids and flow modifiers can improve melt processing, surface quality, productivity, and processing consistency.

Fillers and reinforcements such as mineral fillers, glass fibers, carbon fibers, silica, and other functional materials can modify stiffness, strength, dimensional stability, thermal behavior, conductivity, density, and other properties.

Flame retardants, antistatic and conductive additives, nucleating agents, and other functional additives can introduce application-specific properties that would not be achievable through the base polymer alone.

The formulation therefore becomes an engineering tool: the objective is to create the right balance between performance, processability, durability, cost, and application requirements.

am006.png
SLM printed parts
am006.png
am007.png
am007.png
SLM printed parts

Composites & Lightweight Material Solutions

Advanced materials are increasingly being used to achieve lightweighting without compromising structural performance. Fiber-reinforced polymers and thermoplastic composites combine a polymer matrix with reinforcing fibers to create materials with high strength-to-weight ratios and application-specific mechanical properties.

Glass fiber and carbon fiber reinforcements can significantly increase stiffness and strength, while continuous-fiber thermoplastic composites can provide highly directional mechanical performance. These materials can be used in structural components, transportation, industrial equipment, sporting goods, and other applications where weight reduction and performance are important.

Thermoplastic composites also offer opportunities for forming, overmolding, part consolidation, and integration of multiple functions into a single component. Evonik, for example, describes thermoplastic UD tapes using carbon fiber with PEEK or PA12 matrices as solutions for high-performance lightweight structures. 

The material choice, fiber architecture, matrix chemistry, processing method, and component design must therefore be considered together.

Advanced Materials for a More Circular Plastics Industry

Performance is increasingly being evaluated together with sustainability, resource efficiency, and supply-chain resilience. For advanced materials, this means developing solutions that maintain technical performance while reducing material impact, increasing recycled content, extending product lifetime, or enabling more effective recycling.

Current material development is moving toward mechanically recycled materials, chemically recycled feedstocks, mass-balance approaches, bio-based raw materials, lower-carbon production, and materials designed with end-of-life considerations in mind.

Recycling, however, is not a single solution for every polymer. Engineering plastics, compounded materials, polyamides, polyurethanes, and other specialty polymers may require different recycling technologies depending on their composition and application. BASF notes that a mix of recycling technologies is required for engineering plastics and other specialty polymer streams. 

The challenge is therefore not simply to find a recycled material. It is to achieve the required balance of performance, regulatory requirements, processing behavior, recycled content, availability, and total environmental impact.

am008.png
am008.png
SLM printed parts

Where Advanced Materials Create Value

Advanced materials create value when their specific performance characteristics solve a real application challenge. Their use extends across industries where conventional materials may not provide the required combination of performance, weight, durability, processability, or functionality.

Automotive & Mobility
Lightweight components, under-the-hood applications, electrification, battery systems, connectors, sensors, structural components, and interior applications.

Electrical & Electronics
Insulation, connectors, housings, high-voltage components, thermal management, sensors, and components requiring dimensional and electrical stability.

Industrial Equipment
Gears, bearings, wear components, seals, housings, machine components, and parts exposed to demanding mechanical or chemical environments.

Healthcare & Medical
High-performance polymers, medical-grade materials, specialty films, components, devices, and applications requiring controlled material properties or specific regulatory compliance.

Energy & Infrastructure
Materials for electrical systems, energy equipment, fluid management, insulation, lightweight structures, and demanding environmental conditions.

Consumer & Lifestyle Products
Durable, lightweight, flexible, transparent, tactile, or aesthetically differentiated materials for consumer applications.

Aerospace & Advanced Transportation
Lightweight composites, high-performance polymers, thermal-resistant materials, specialty films, and components where weight and reliability are critical.

am010.png
am010.png
am011.png
am011.png

How Rehberium Supports Advanced Materials Businesses

Our role is to connect advanced material technologies with the right applications, customers, suppliers, and markets.

For international producers of engineering plastics, specialty polymers, additives, fillers, modifiers, composites, TPU, polyurethane systems, specialty films, and other advanced material solutions, Rehberium provides local market knowledge and hands-on business development support in Türkiye.

We help identify relevant compounders, processors, manufacturers, OEMs, distributors, formulators, and industrial users while supporting lead generation, customer development, supplier sourcing, market research, communication, and commercial follow-up.

For Turkish companies, we help identify international material suppliers, specialty polymer producers, additive manufacturers, technology partners, and alternative sources for demanding material requirements.

We do not approach advanced materials simply as products to be sold. We look at the material, its technical properties, the application, the manufacturing process, and the commercial requirement together—then help connect the right solution with the right opportunity.

Let's Build Your Advanced Materials Opportunity in Türkiye.

Whether you develop engineering plastics, specialty polymers, additives, fillers, composites, TPU, high-performance materials, or other advanced material solutions, Rehberium can help you identify the right customers, partners, suppliers, and business opportunities in Türkiye.

Book a Call
bottom of page